Kohler KUS-DCTC-400WS-QS1 400A, 120/208V, 3PH, 3 Pole, 4W, ServEntr, Nema 3R, UL Listed ATS 2-WIRE Start

Kohler KUS Spec Sheet *CLICK HERE*

KUS IS A STANDARD 2-WIRE START ATS

Kohler KUS-DCTC-400WS-QS1 400Amp, 120/208V, 3ph, 4W, SE Rated, Nema 3R ATS

Overview

It's the brains behind your generator system. The automatic transfer switch (ATS) continuously monitors the power coming from your utility. When the power goes out, the ATS automatically transfers power from the utility to your generator. When utility power is restored, the ATS turns off your generator and transfers back to power from the utility grid.

Transfer Switch Standard Features Enclosed Contact Power Switching Units

• UL 1008 listed (cULus)
• file #E58962 (automatic)
• IBC seismic certification available
• Contactor-based service entrance ATS
• Available in 2, 3, or 4 pole configurations
• Integral solid neutral provides line-to-neutral monitoring
• Electrically operated, mechanically held mechanism
• High withstand and close-on ratings
• Design suitable for emergency and standby applications on all classes of load, 100% tungsten rated through 400 amps
• Silver alloy main contacts
• Gold-flashed engine start contacts rated 2 amps @ 30 VDC/250 VAC
• Front-accessible contacts for easy inspection
• Front-replaceable main and arcing contacts (800-4000 amps)
• Reliable, field-proven solenoid mechanism
• Switching mechanisms lubricated for the expected life of the transfer switch
• Internal manual operating handle
• Main shaft auxiliary position-indicating contacts rated 10 amps @ 32 VDC/250 VAC
• NEMA type 1, 12, 3R, 4, and 4X enclosures available
• Standard one-year limited warranty. Extended limited warranties are available.

Standard-Transition Models (KUS)

• Standard-transition operation
• Standard-transition transfer time less than 100 milliseconds (6 cycles @ 60 Hz)
• Double-throw, mechanically interlocked design (break-before-make power contacts)
• Solid or switched neutral